In summer, you can drive all the way to the upper trailhead at 12,000', but in winter the Sherman road is closed at the intersection with County Road (CR) 2 -
1. After leaving CR 2, continue 3 miles up the Sherman road to 12,000', below the mine buildings. Because this is an unmarked trailhead, the first priority is to locate the trail that leads across the basin. Find the small road that turns down and back to the right below the side of the main road -
2. This is the best place to start. Walk down this road and look for the trail that starts on the left after about 50 yards -
2. The trail drops past a wooden electric pole and heads south toward the stream below. There are a few spots where the trail has been washed away. Stay with the trail as it weaves southeast through willows to reach the east end of Iowa Gulch. Continue south and southwest on the trail as it climbs up onto talus -
3 and
4. The trail becomes thin in some areas but it's fairly easy to follow. Continue to the gully between Mt. Sherman and Mt. Sheridan -
5.
Stay on the trail as it climbs southeast along the left side of the gully -
6. Your next goal is to reach the Sherman-Sheridan saddle at the top of the gully. Switchback to 13,000' (
7) before sweeping left to reach the north side of the Sherman-Sheridan saddle -
8 and
9. Begin hiking north up Sherman's southwest ridge -
10. There is a good trail all the way to the summit. You will encounter various trail sections but they all lead up the ridge. Between 13,600' and 13,800', the ridge narrows and there is only one trail along the ridge crest -
11. Continue to the final pitch along the ridge (
12) and ascend to the south end of the Sherman's summit ridge -
13. Walk another 0.2 miles to reach the true summit -
14 and
15.